FINNTEX

Instructions for use:

The support surface have to be dry and clean. Before you start working, the support surface have to be cleaned of dust or debris from the previous layers and any type of impurities, which limits adherence. The support must not be wet or frozen.
Finntex is ready to use after opening the bag, therefore no water should be added to the product.
It is applied mechanical, firstly horizontally and the vertically, at an ambient temperature and of a support surface between 5°C and 25°C.
The application machine type for self levelling application: spraying machine with a recommended pressure of 120 bars, with a nozzle no 427-430, depending on the type of machine used.
The next coat should be applied after the previous one has dried.
The product can also be applied with a roller. It is recommended that before application with the roller, the substrate be primed with Adera Universal Primer in a 1: 3 dilution with water. By applying with the roller, the applied surface increases considerably by up to 100%. The product should not be diluted. It is recommended that the product be mixed before application. After application with the roller, it is necessary to level the surface with a trowel.
Sanding should only be made after the surface has completely dried. The surface can be paint after the complete drying of the product.

Handling and storage:

The product must be stored in tightly closed containers at a temperature between + 5 °C and + 25 °C. Avoid frost and direct exposure to sunlight.